BG-EHS Frequently Asked Questions

1. Why does it cost so much?  There are plenty of devices out there that promise to do (kinda sorta) the same thing for a fraction of the price.

BioGeometry balances electromagnetic radiation, building materials, geopathic stress, structure/design elements, and water vitality.  We’ve found that this work requires a trained professional and specialized equipment.  Check to see if those other devices cover that same, extensive list.  

Also many inexpensive “plug & play” solutions on the market do not extend very far in to the home.  And many do not keep working for long, assuming they work at all in your particular environment.  

BioGeometry Environmental Home Solutions (BG-EHS) tools and methodology have been developed and analyzed over decades.  And their staying power has been verified to hold long-term. 

I customize the work for your home, based on the results from hundreds of data points.  I test your tailored solutions at the end of the installation to verify they are working.

2.  Can you do the work remotely?

Due to the precise nature of the many measurement required, the bulk of BG-EHS work needs to be done in person.  A few preliminary measurements can be taken remotely to advise the initial on-site visit. As such Laura will request you send photos of the electricital panel (circuit breakers visible), main water line and hot water heater before starting work. Accommodations can be made if these are not accessible, such as in a dorm room living situation.

3.  You came and  worked on my home but it doesn’t feel any different.  How do I know it’s working?

BG-EHS practitioners take hundreds of measurements and analyze the resulting data points to verify that an appropriate installation is working.  Clients may or may not notice the effects of BioGeometry balancing.  Many people do, but any kind of feeling cannot be guaranteed. 

Kindly recall that BioGeometry is not a form of medical treatment.  It is an environmental science.

Some people may possibly notice a benefit from deeper, more layered BioGeometry balancing if they are particularly sensitive (such as those diagnosed as “EMF sensitive”). But even if you do not feel any difference, the work is of enormous benefit, as demonstrated by the BioGeometry Research Portfolio. 

A few testimonials detailing some individuals’ experiences can be found (for general informational purposes only) in BioGeometry books — “Back to a Future for Mankind” and “BioGeometry Signatures.”  But BioGeometry does not rely on testimonials for marketing.  BioGeometry relies solely on the evidenced-based results in the Research Portfolio.

I would recommend clients start out with an installation in just one room of the home, preferably the bedroom, to get familiar with how BioGeometry will impact your environment.  I can continue to balance the rest of the home, and/or go deeper into balancing more in the initial room, if so desired. 

4.  What are EMFs?

EMFs are electromagnetic fields.  They are invisible ranges of radiation that come from power lines, Wi-Fi routers, cell towers, smart meters, and electronic devices (among other things).  BioGeometry is the only science that has been effectively applied on a wide scale for the harmonization of the effect of EMFs and geopathic stress (Earth energy grids) on biological systems. 

5. What are gridlines/geopathic stress/Earth energy grids?

Gridlines refer to various networks of energy running around and through the planet. In BioGeometry we work primarily with Curry and Hartmann/Benker grids. Research (by Kathe Bachler, Gustav von Pohl, among others) shows that sleeping on such gridlines correlates to many environmental health problems.

6.  What do the installed tools look like?

Some tools are flat discs about the size of a quarter, with various angles etched into the surface.  Others are about a foot tall and roughly the proportion of a candlestick, with various shapes molded into the form.  There are also plastic strips about the size of a finger, and additional angles the size of a quarter.  Tools are made of clear plastic or plexiglass.  

The tools are meant to be fairly unnoticeable and/or pleasing to the eye. Please refer to photos on Dombrower.com/BG.

7.  How do you install the tools?

I install tools with a variety of adhesives to help hold them in place.  This could involve Command strips, Blu-Tac, Museum Putty or Museum Wax, double sided tape, etc.   I generally try to use temporary adhesive, but even some of these stick stubbornly and may not be easily removed.  They could leave behind residue or they could inadvertantly remove bits of wall plaster, paint, varnish, etc. when taken down.  If there is a concern with any type of adhesive, kindly discuss these before installation. 

Some discs and angles come with a layer of adhesive already applied to the back, for ease of installation.  However, when setting these up on textured walls and other bumpy surfaces, an additional layer of adhesive (such as from a Command Strip) helps hold them in place.

8.  Can I move the tools after you leave?

No! I do not recommend moving the tools at all.  If you move them, they will become “unplugged” and efficacy will reduce significantly.   Some tools will stop working entirely.  

The smaller tools (i.e. discs, L-stickers, plastic strips) may work if they are covered. However, the effect may be muffled. The larger stands (roughly the dimensions of a candlestick) need space around them to keep working effectively, so do not block them.

I use temporary adhesive to allow for tool re-use in the event of moving or remodeling. It is recommended that if any construction, remodeling, painting, etc. is planned, that the BioGeometry solutions be installed afterwards.  You don’t want to inadvertantly knock off, plaster or paint over them.

9.  How long does it take to set up?

Depending on the size of the installation, it could take anywhere from a couple of hours to several days.  The work will generally be broken down into four hour appointments, during which time I may need access to the fusebox, main water line and water heater, and other areas in and around the home.  In the case of dorm rooms, apartments and other multi-family living arrangements, we’ll discuss alternative ways to address balancing utilities prior to BioGeometry installation.

10.  Do you check the work after you leave?

I check the work as I am layering it in and again at the end before I leave.  Depending on the level of work engaged, I may take photos to verify solutions are holding at a later time.

11.  How long does the balancing last?

These are long-term solutions and have been tested to hold for years, as long as the tools remain in place.  However, there are some situations that could affect the integrity of the installation.  This includes major construction (changing more than 50% of the shape of a room), an earthquake, a new nearby powerplant or cell tower, etc.  A quick check can verify if corrections are holding.  Additional work can be contracted to address increased environmental stress.

Please note that If the tools are re-arranged, they will likely stop working.  Do not move them.  

12.  Can I re-arrange the furniture without impacting the BioGeometry balancing of the space?

Yes, as long as the furniture doesn’t have a tool set up on it.  I try to install tools on non-movable locations such as walls, windowsills, etc.  However, if a tool needs to be set up on a bookcase, for example, moving the bookcase will “unplug” the tool. In some cases, blocking the tool behind a book, piece of art, framed picture, etc. will also hinder its effectiveness. Please keep the area clear.

13.  How does BioGeometry work, excatly?  

BioGeometry works with the laws of harmonics to balance the environment.  BG tools interract with compression/scalar waves within a space.  These tools are not electromagnetic in nature and their effects will not show up on EMF meters.  However, the effects can be noted through biofeedback devices as our bodies respond to various forms of environmental stress, as demonstrated in the Research Portfolio. 

Specifically, we work with a combination of qualities referred to as “BG3” which has been proven to be universally beneficial.  For BioGeometry Environmental Home Solutions work, we don’t hook people up to biofeedback devices.  Instead we rely solely on the presence or absence of BG3 at various data points.

14.  What is BG3?

BG3 refers to a combination of three frequencies or qualities that BioGeometry has found to be universally beneficial.  They are subtle energy qualities that correspond to the harmonics of ultraviolet, gold and what the French Medical Radiesthesists historically referred to as “negative green” or “radiesthesia gray.”  

15.  What are powerspots?

Powerspots are locations of concentrated beneficial energy, including BG3.  

16.  Do you guarantee your work?

Yes, in that your environment will be balanced as measured by the presence of BG3 at various subtle energy/dimensional levels such as physical, emotional, mental, etc.   Depending on the work contracted, some situations involve checking BG3 after 30 days.